| Product Specs | |
|---|---|
| Range: | 0 to 50 thru 0 to 1000 PSI (3.5 thru 69 BAR) Gauge, Sealed Gauge, Absolute | Warranty: | Product Warranty |
GP:50’s model 540-IM series offers CANbus protocol in a flush faced sensor design. GP:50’s CANbus protocol provides high resolution, reduced noise and improved thermal performance. The flush Inconel diaphragm provides maximum corrosion resistance and limits plugging associated with viscous media.
GP:50’s model 540-IM series offers CANbus protocol in a flush faced sensor design. GP:50’s CANbus protocol provides high resolution, reduced noise and improved thermal performance. The flush Inconel diaphragm provides maximum corrosion resistance and limits plugging associated with viscous media.
| Markets | |
|---|---|
| Pressure Ranges |
| Model: | 913 |
| Range: | 0-30" WC to 0-700 feet WC (762 mm to 213.4 meters WC) |
| Warranty: | Product Warranty |
The Model 913 from GP:50 is a high-accuracy submersible level transmitter. It features an asynchronous serial communication output (SDI-12-v 1.3), typically used to monitor environmental data. This also allows for communication with compatible data loggers or data acquisition
systems. The incorporation of a hydrophobic breather vent ensures extended trouble-free service within demanding applications. These features, combined with the low power requirements of the Model 913, make it particularly ideal for remote well monitoring applications.
| Model: | 251/351 |
| Range: | 0-1000 thru 0-43K PSI (70 BAR thru 2,965 BAR) |
| Certification: | 3A |
| Warranty: | Product Warranty |
The Model 251/351 from GP:50 is a sanitary flush pressure transmitter with a unique one-piece design. This flush design provides a zero dead volume
eliminating the need for recessed tee’s or dead ended process connections. This design removes the possibility of trapped media or contamination and allows for a clean out-of-place (COP) device, providing for a sanitary, in-line solution.
| Model: | 240/340-IM |
| Range: | 0-75 thru 0-750 PSI (5 thru 52 BAR) gauge, sealed gauge, absolute |
| Certification: | ATEX & IEC Hazardous Approvals |
| Warranty: | Product Warranty |
The Model 40-IM series from GP:50 is a flush face mounted industrial pressure transmitter. It is expressly designed for higher viscosity media, particularly where such media can otherwise clog or damage traditional
non-flush port sensor designs. The rugged, all-welded, Inconel design of the 40-IM series allows for greater compatibility with corrosive media. No zero offset is caused during sensor installation.
| Model: | 311-IM |
| Range: | 0 to 50 PSI thru 0 to 750 PSI (0 to 3 thru 0 to 50 BAR) *Some Options May Affect Range *PSIG, PSIS, PSIA, PSIV Compound Ranges Available |
| Warranty: | Product Warranty |
The Model 311-IM from GP:50 is a flush mounted, hazardous location approved pressure transducer, designed to provide added reliability within slurry or thick process media applications. Their rugged, all-welded flush mounted design facilitates accurate measurements of corrosive or higher viscosity media, in applications where non-flush port sensors are otherwise
prone to clogging or damage. No zero offset is caused during sensor installation.
Email Us or call (877) 774-4751 or (716) 773-9300 (Outside US)
or find your local GP:50 Sales Representative using the links below.
